02m axles

[idlandk]

anyone here have both axles for an 02m for a reasonable price?

[onceover]

Re: 02m axles

Check with Colin

[kujiwara]

Re: 02m axles

i would stick to OEM rebuild kit if you can

[idlandk]

Re: 02m axles

I don't have any axles so I need two.

[MechEngg]

Re: 02m axles

1.8t vs vr6 makes a difference here, make sure you specify

[idlandk]

Re: 02m axles

Must be 4 cylinder. Wasn't sure if vr's were different. Thanks.

[idlandk]

Re: 02m axles

No one? No reply from colin so I'm assuming he doesn't want to sell. Might be rocking empis for a while

[MechEngg]

Re: 02m axles

Bleh EMPI.
I have a drivers side raxle but it's not going to be the most affordable solution out there. Quality yes, lowest cost no. PM me if you are at all interested

http://www.eurodrivers.ca/forums/sho...4-Cylinder-o2m

[Natty54]

Re: 02m axles

I can get new. Exact year and model? 5 spd?

[idlandk]

Re: 02m axles

If you had two raxles I'd consider it but one doesn't help me a whole lot, thanks for offering though.
It's a drw 6 speed that I'm assuming uses any 4cykinder 02m axle. New sounds super expensive!

[MechEngg]

Re: 02m axles

You could find one OEM passengers side and get my drivers side raxle. The DS is the one that is under the most stress anyways and is the one more likely to fail so it might be a better bet to go raxle for it

[idlandk]

Re: 02m axles

I'll definitely keep it in mind, I'll see what I come across. Gonna need something in the next couple months

[All_Euro]

Re: 02m axles

My 02M axles will be available in about a month... you could always grab my passenger and the raxle drivers...

[idlandk]

Re: 02m axles

You have mail