Announcement

Collapse
No announcement yet.

VAG-cables vs VAG-COM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • VAG_Tech
    replied
    Re: VAG-cables vs VAG-COM

    I just got word that I can get a diag cable for Volvo! Also if anyone has any questions about any products PM me!
    Last edited by VAG_Tech; 08-22-2008, 11:24 PM.

    Leave a comment:


  • VWSM
    replied
    Re: VAG-cables vs VAG-COM

    depending on what you want it for 54.00 bucks for just scanning or as high as
    800.00 for full programing.
    Davey i'am waiting for your results and what your cable/programming can do.
    Paul

    Leave a comment:


  • VAG_Tech
    replied
    Re: VAG-cables vs VAG-COM

    Just got my first sample of the 805.0 Vag-Can cable today. Awesome quality! I will grab some screen shots tomorrow at work.

    Leave a comment:


  • Stonewall
    replied
    Re: VAG-cables vs VAG-COM

    Originally posted by baquiran View Post
    OK I have decided to go with the real thing, Ross-Tech. Now where to buy? I called Sensolutions out in Springbank which is about 5 minutes from my house and they don't deal with Ross-Tech anymore. Anywhere else in Calgary? Edmonton? Red Deer?
    From the ross-tech distributor list:
    http://www3.ns.sympatico.ca/roseland/VAG-COM.htm
    I have heard good things about roseland before so I think it would be good to order from them. Depending on what you want to do though, you might want to check out some of Dave's cables.

    Leave a comment:


  • VAG_Tech
    replied
    Re: VAG-cables vs VAG-COM

    VAG-Cables was just started by my wife as a hobby. She has connections in Asia for these cables and software. Don't be fooled by the price, it's good stuff. Perfect for the DIY-Guy.
    Last edited by VAG_Tech; 08-20-2008, 10:55 PM. Reason: spelling :P

    Leave a comment:


  • stefan
    replied
    Re: VAG-cables vs VAG-COM

    thats a drag.. they were good to deal with.

    Leave a comment:


  • darkmanCANADA
    replied
    Re: VAG-cables vs VAG-COM

    OK I have decided to go with the real thing, Ross-Tech. Now where to buy? I called Sensolutions out in Springbank which is about 5 minutes from my house and they don't deal with Ross-Tech anymore. Anywhere else in Calgary? Edmonton? Red Deer?

    Leave a comment:


  • Stonewall
    replied
    Re: VAG-cables vs VAG-COM

    There is also quality in the connector to the OBD port itself. Although I have recently learned that Ross-tech is presently using crappy connectors again.

    Leave a comment:


  • R_Ethug
    replied
    Re: VAG-cables vs VAG-COM

    when you buy it from rosstech you get thier cable and the registered vagcom software

    the cables from ebay are the same things basically and you get a shareware/demo of the vagcom software

    Leave a comment:


  • stefan
    replied
    Re: VAG-cables vs VAG-COM

    i *think* the plain one will read and clear most codes, but will not let you record and graph the results for sensors, and will not let you in to the adaptations to change any settings.

    The Rosstech ones have extra hardware that unlocks extra features of their software.

    You may not get the k-line protection on a cheap one either, which I don't think will screw up the car, but can bugger the laptop if you have a bad aftermarket stereo install.

    There are a few airbag controllers around 2000-2001ish that can give a permanent airbag warning light if the controller is scanned with an older cable and an older version of software. I think the new cable ross-tech cable wont do this, but I also think they have a software safety built in now, so this probably isn't an issue either way anymore.

    Leave a comment:


  • darkmanCANADA
    started a topic VAG-cables vs VAG-COM

    VAG-cables vs VAG-COM

    What is the difference between the VAG-cables brand and the Ross-Tech brand OBDII cable other than the price? Need feedback. I am thinking you get what you pay for. I don't want my ECU to be bricked by an inferior product.
Working...
X