Re: Paint/Body Work Questions Answered! (Cosmos)
Will do! Thanks again!
Announcement
Collapse
No announcement yet.
Paint/Body Work Questions Answered!
Collapse
X
-
Re: Paint/Body Work Questions Answered! (Cosmos)
^ Ahaha
Evan, if you are worried about rust I wouldn't rely on touch up paint for more than a few weeks. Because paint isn't actually what protects the metal that falls into the primer/surfacer to do and the clearcoat keeps water out.
Feel free to drop by! I would set up an appointment with Loc first however, and let him know you're from eurodrivers/talked to me already!
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
Do I even dare post pictures of my fenders on here?
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
I will definitely give this a shot, given the spot of it rust is more my worry than anything else. Thanks for the great info, as always.Originally posted by P Arkus View PostIts tough to tell by the pic, but you might be able to get away with rolling the fender and touching it up with touch up paint. Depending how the roll goes, you might be able to get that chipped part rolled mostly into the inside of the fender. At that point, its in a spot nobody can really see, so if you carefully sand around the area and "seal" it up with touch up paint, you might be able to prevent it from chipping more. Its not a perfect solution, but its a cheap one for a spot that most people will never see.
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
Thanks man, few other things you guys can look over when the time comes, unrelated to tire rubbing and more related to just stupidity.
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
Its tough to tell by the pic, but you might be able to get away with rolling the fender and touching it up with touch up paint. Depending how the roll goes, you might be able to get that chipped part rolled mostly into the inside of the fender. At that point, its in a spot nobody can really see, so if you carefully sand around the area and "seal" it up with touch up paint, you might be able to prevent it from chipping more. Its not a perfect solution, but its a cheap one for a spot that most people will never see.
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
Haha, I would roll your fenders if that's what you plan on doing and then bring it by the shop for an estimate if you want to get some paint done!Originally posted by Fated View PostYeah kicking myself now. Of course everything has been reactionary with me though making this infinitely more a pain in the ass.
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
Yeah kicking myself now. Of course everything has been reactionary with me though making this infinitely more a pain in the ass.
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
You're usually better off rolling the fenders first to try and prevent the chipping from happening in the first place.
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
Hahah I figured I'd be doing that at some point. Figure it's worth touching up after the fender roll? First time dropping the car, if that wasn't blatantly apparent
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
I see a fender rolling in your future! Thats from the tire hitting the fender on a big bump.
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
Found this gem today. Some kind of outward dent and the paint chipping off all around it. Looking to get it fixed as it'll drive me nuts knowing it's there waiting to chip some more paint. Any insight is appreciated! Also have some other stuff needing a look at so I'll most likely swing by and get an estimate.
Last edited by Fated; 05-29-2014, 10:17 PM.
Leave a comment:
-
Re: Paint/Body Work Questions Answered! (Cosmos)
I find using a heatgun works the best on those trim pieces
Leave a comment:

Leave a comment: