Search:

That they are, I didn't look very hard for prices lol. How about an offer closer to $80?

Any interest in an AMD FirePro W4100 graphics card? Just pulled it from a commercial desktop that I'm upgrading.
2 GB GDDR5
PCIe 3.0 X16
4x mini display port, can throw in some adapters if...

Anyone interested in an old Alpine Type R 10" sub? It is the smooth surround, not the newer ridged one. Have 2 but the cone detached from the surround on one, may be fixable if you are in to that,...

One of each available:
Toyo Proxes A20 (All Season) P225/45R18 91W - 5/32" tread left $25
Hankook Ventus S1 Evo2 245/35ZR19 93Y - 6-7/32" tread left $50

Bump, these are now in Calgary so no shipping required!
...

This is pretty far away (Powell River, BC) but if anyone is interested, my company has shut down and we are selling off our equipment in an online auction. Machine shop and fabrication shop...

VW/Audi 07K 905 715D. From 2.0L FSI, all worked when removed. 2 genuine, 3 "Borg Warner" from the local parts store. $20 plus shipping from Powell River for all 5.

Sorry I don't have a line on a set, but I can tell you when mine came apart I gutted them and tried a bunch of different adhesives to put them back together, never did find one that worked and they...

My buddy now has a 2002 S3 available:
https://www.facebook.com/ZenAutoworks/
...

A buddy of mine that imports cars has a euro spec B5 S4 Avant available in Calgary....

Bump

Bump. Winter's coming... Offers?

Bump. Apparently location of pics changed, fixed.

Bump. $200 obo.

These were my winter wheels. Replica wheels for B7 A4, so they fit hub centric and use the original ball seat bolts.
Stripped and painted black with flat clear in 2014. Some chips from winter use...

Sold.

Sure, $50?

I sold my car so don't need these anymore.
https://scontent-sea1-1.xx.fbcdn.net/v/t31.0-8/24173057_1834945083199448_7851114620107872440_o.jpg?oh=89f6c2c8b3c081f4657a3af0c09b3022&oe=5AA1A7A4

The...

Also have the original in tank low pressure fuel pump, removed around 150k while diagnosing what turned out to be HPFP cam failure. Offer?

I have available the factory cat-back exhaust from my 2007 A4. It was removed in 2012 at about 100k km. It has been sitting outside, covered, since mid 2013. It is all one piece but I can cut it...

I'm looking at getting into a 2014-2017 A4 or A5, budget around $35k. I'm closest to the Vancouver area and there are a handful of 2017 A4's for only a few grand more than 2014s. Obviously a newer...

NOT Canadian Freightways. They keep smashing my shipments!!

I have been through a couple batches of no-name coil packs (supposedly Borg Warner, but no markings on the coil or box) and different plugs since moving to BC. I finally bit the bullet and got OEM...

Anybody playing this? Set up a club? I'm enjoying it so far.

2 sets of 4 spark plugs for 2.0T for sale. $10/set plus shipping from Powell River, BC.
Denso Iridium IK20 - used less than 200 km
E3 E3.64 - used less than 1000 km
...

Just bought my second set of Michelin X-Ice for my A4, really happy with them. Thanks for the heads up on the rebate! FYI paid $853 before tax, INCLUDING mount and balance, here in BC.
Have...

Apparently you can't buy just the drivers mat so I got a whole new set and am looking to sell the remaining original mats. Passenger front and both rear mats, Audi OEM rubber floor mats. The...

Well in the olden days people picked up a "newspaper" and in the back was a classified section with cars (among other things) for sale. I'm old enough to have seen these newspapers, in fact I bought...

Update: Took my car into the dealer in Vancouver last month. They replaced the intake cam, HPFP and cam follower under warranty. STILL MISFIRED!! Only at idle now though. They worked on it for 2...

Cleaned the carbon last week, no change. Changed the low pressure pump and filter today, no change. I wonder if my car is covered by the extended warranty on the cams.

All done cleaning the carbon out. Re-assembly was MUCH easier, especially with the parts out of the way mentioned above.
...

DON'T DIY!!! Pay someone a lot of money to do this for you and be happy you didn't do it!!

I followed the Bentley manual instructions and looked at some walk-throughs online (for transverse VWs...

I did consider carbon build up, and will have the intake off soon to clean it out as well. I put a boroscope in the intake but couldn't get past the divider plates to actually see the valves. I ran...

Cam didn't look/feel worn, but its a pretty small hole to look in. The new follower didn't have any noticeable wear on it.

Fuel filter was last done 3 years / 50k km ago. Thought it was on the...

I have been having misfire/stuttering issues for some time now that were very intermittent but seem to be getting worse. I went on a road trip a few weeks ago and a few times had what felt like a...

I should mention that my car has the larger OEM brakes listed in the Bently manual (not the Brembos though ;) ), so maybe the bearing housings are different because of that.

The part that is...

Update - ECS sent me an RMA for the split bearing only and have completely ignored my request for some compensation for the press kit requiring modification. They did not mention it in any of their...

I heard a faint noise coming from the passenger side at ~60 km/h a few weeks ago so I jacked up the car and checked all 4 wheels as I suspected it might be a bearing. I could not detect any movement...

Sold.

Thanks for the offer, but I'm in Powell River, BC, now so I have a new one coming. If I was still in Calgary or somewhere with a dealer I would go for warranty but as it is I have ferries and many...