Announcement

Collapse
No announcement yet.

Kenny's UrS4

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: Kenny's UrS4

    Originally posted by Canadian Turbo View Post
    Not going to lie, I also took a long hard look at the SNES
    Love my classics!
    2016 VW GTI (Stock)
    2016 VW Jetta 1.4T (Stock)
    1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
    2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

    Comment


    • Re: Kenny's UrS4

      Been a while since ive updated this thread, i was trying to focus on the coupe i bought. I reached a point where i realized the Coupe would never be what i wanted. It was much more of a full restoration then a simple build. The Coupe is sold, and im gonna focus on the UrS this summer. The engine is build to hold just north of 550Whp, but im only planning to hit mid 400s this summer. For next summer ill be looking to get closer to that 550whp mark.

      I will be installing the AAN engine i build this spring. The specs are:

      Block was tanked and decked
      Por15 on the block
      Issam crank breather
      Issam billet thermostat housing
      034 billet coolant outlet
      DM Forged AAN rods
      Calico coated main bearings
      Calico coated rod bearing
      Stock pistons with ceramic coatings
      Rings Gapped to .19
      Ballanced Crankshaft
      Fluidamper crank damper.
      All bearing clearances confirmed re checked and documented.
      (All hand build by me alone)

      Cylinder head rebuild specs:
      Vapor hone cleaning
      Stock valve springs
      Stock retainers
      Stock keepers
      Ferrea 6000 series valves
      7A cam shafts
      New timing chain
      ARP Head studs
      MLS head gasket
      7A Valve cover powdercoated purple
      Audi R8 coil packs
      (All hand build by me)

      Turbo setup
      EFR 6258 ( for now )
      Wagner HO RS2 exhaust manifold
      3" SS downpipe with Vband into a 3in with 1 MF muffler
      Stock rebuilt wastegate with 1.9bar spring

      Engine Management:
      Audi AAN ECU
      3BAR Map sensor
      EFI Express chip set ( 94 Oct with W/M)
      Innovate AFR gauge
      Podi Boost gauge ( new one )

      Intake setup
      Snow performance W/M setup
      Stock AAN intake manifold
      034 intake spacer
      Stock UrS intercooler

      Fueling
      630cc injectors
      Walbro 450 intank pump
      EFI Express dual pump bracket

      Clutch
      Southbend 7A clutch stage 2 PP stage 4 Disc.
      034 lightweight Aluminum flywheel
      034 all metal throw out bearing
      ARP FW bolts (7A fitment)


      Sent the Fluidamper to Issam today for some light machine work. Planning this swap in the next few weeks. Id like to try and get a few 1/4mi passes on the current k24 7400 setup before i put in the built engine.

      Parts and services for this build came from the following distributor's:
      Autobahn performance
      Fourstar motors
      BEL engine services ( fixing previous machine shop mess up)
      INA engineering
      EFI express
      034 motorsport
      Ferrea valves
      Podi.ca

      Powdecoating, media blasting and Ceramic coating services
      Fourstar motors ( Edmonton)
      Strongarm cylinder heads (Panoka)

      People who have gone out of their way to help
      Lars Bjornstad ( previous owner of Coupe)
      Nate Jesperson
      Dustin Donovan
      Neacail Campbell (Fourstar Motors)
      Sterling Ball
      Jeff Gerner (Worlds fastest C4 S4) spent hours on the phone with me.
      Remi Szafransk (Autobahn Performance)

      These people gave me their time, help, advice, donations, parts, connections, name it, they were there. Huge thanks for their continued support as this project get closer to completion.










      Ill update more in a bit, i need to peel potatoes now lol
      Last edited by morris400; 05-21-2020, 09:12 PM.
      2016 VW GTI (Stock)
      2016 VW Jetta 1.4T (Stock)
      1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
      2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

      Comment


      • Re: Kenny's UrS4

        Got the 7A stuff all pulled off and got my AAN oil pan all cleaned up. Thats about all really. Have some parts coming in from Ottawa and then ill plan the weekend to swap stuf over.

        And i took a day to re org the garage after 6months of coupe storage.




        2016 VW GTI (Stock)
        2016 VW Jetta 1.4T (Stock)
        1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
        2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

        Comment


        • Re: Kenny's UrS4

          Got the sport steering wheel in today. Waiting on the new covers so the horn will work but im happy. Much nicer feel.

          Waiting on quote to get it re died and cleaned up.


          2016 VW GTI (Stock)
          2016 VW Jetta 1.4T (Stock)
          1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
          2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

          Comment


          • Re: Kenny's UrS4

            Made some more progress on the EFR preperation. Im trying to sort out all the little things before a big swap to ensure things are copacetic.

            Installed Walbro 450 fuel pump. Fuel pressure now 66 psi idle
            Installed new boost gauge ( Podi )
            Installed W/M controller ( just the gauge for now )
            Installed innovate WB02 ( monitoring)

            Trying to figure out why im running so rich, i unplugged the stock 02 and ran in open loop mode. Found the following AFR results:

            Cold idle - 10.5-10.6
            Warm idle - 10.8-10.9
            2k cruise - 11.0
            2.5k cruise- 11.1-11.2
            WOT 4k to 7k -9.8 consistant.

            With the 02 plugged in the ECU corrects the cruise and the Warm idle to 14.7-14.9 AFR. On cold idle, its at 10.5 and at WOT its at 9.8-10.2. I have another revision coming from EFI express.

            Im holding of on the WM install until i get this setup running well enough that im confortable with the whole setup.


            Last edited by morris400; 06-14-2020, 08:52 PM.
            2016 VW GTI (Stock)
            2016 VW Jetta 1.4T (Stock)
            1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
            2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

            Comment


            • Re: Kenny's UrS4

              Managed to finally, after 2 years, get my AFRs in check. Car is now pullkmg a nice 11.7 AFR under boost and pulls HARD now. I do have a speed density tune also coming for the car, but that will be closer to the end of summer i think.

              I have swapped out my engine mounts for a set of stock mounts and ler me tell you, if you never launch...poly is overrated. Stock is sooooo nice.

              Built engine talk: The engine is still on the stand, after some poundering ive decided to change the turbo and manifold. Changing from the Wagner cast manifold to a custom tubular manifold from Race3motorsport in Ontario. Turbo choice is most likley going to be an Persicion 5858 as i want to get as close to 500whp on pump gas. Manifold is 4-6 weeks away, and im not sure if ill have the turbo for that by then and still need to fab up a DP and screamer pipe.

              I did get the fluidamper finally sorted and installed, so there is that.

              2016 VW GTI (Stock)
              2016 VW Jetta 1.4T (Stock)
              1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
              2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

              Comment


              • Re: Kenny's UrS4

                Lots of changes,

                Race3motorsport failed to come through, now im probably 4 months or more behind. Next year now!

                Turbo choice is confirmed, Borg Warner S257 SX-E.
                FMIC is installed.
                My Inovate WB02 **** the bed, new one coming.
                Pics eventually lol.
                2016 VW GTI (Stock)
                2016 VW Jetta 1.4T (Stock)
                1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
                2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

                Comment


                • Re: Kenny's UrS4

                  I have finally got my new manifold and downpipe. Its all mocked up for now. Will be getting it ceramic coated eventually. Looking to swap the engine in to the Urs4 this Dec.













                  Once i get the old ( old but perfect) engine pulled, ill be selling all of the current turbo set up ( Volvo K24-7400) to fund a new ECU. Either Maxxecu, Ecu Master , or Vems once again. This engine deserves a perfect tune.

                  Im also now running a MASSIVE 31x3x12 intercooler which has really improved alot of the topend and oddly has not dropped much boost. In cooler temps i see 28-29 psi and in warmer i see 25-26 psi. Requested is 27-28. On the stock IC i was seeing 27 spike.


                  Last edited by morris400; 11-14-2020, 10:33 PM.
                  2016 VW GTI (Stock)
                  2016 VW Jetta 1.4T (Stock)
                  1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
                  2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

                  Comment


                  • Re: Kenny's UrS4

                    This is just great bud!!
                    --
                    Rod
                    Ex-presidente

                    Drive

                    2016 VW Golf .:R

                    Drove
                    2001.5 Audi S4 / Santorin Blue STAGE II+ / JFonz Tuned

                    Comment


                    • Re: Kenny's UrS4

                      So sick!!!
                      sigpic

                      <<<Ben>>>

                      Present:
                      His: 2008 Cayenne Turbo
                      Hers: 2012 Ibis White Q5
                      Past:
                      B7 A4 Avant 6MT Black
                      B7 A4 Avant 6MT Silver
                      2004 .:R32 BMP
                      2001.5 Noggy blue s4
                      2000 VW GTI 1.8T
                      1997 VW Jetta VR6

                      Comment


                      • Re: Kenny's UrS4

                        Originally posted by asp gti View Post
                        So sick!!!
                        Thanks buddy, and you as well Rod.

                        Its starting to come together now. I can see light at the end of the tunnel.
                        2016 VW GTI (Stock)
                        2016 VW Jetta 1.4T (Stock)
                        1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
                        2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

                        Comment


                        • Re: Kenny's UrS4

                          New year new you, kinda i guess. The build still moves on. Have a few more thing yet to arrive,

                          BOV
                          ARP crank bolt
                          Crank lock tool (loan)
                          Serp tensioner
                          Etc

                          Finally picked up my Vems ECU awhile back so im set there. Im.sure the tuning will drive me crazy...again.

                          Got my compressor housing coated, and got around to pulling the old engine out, and im going to clean up the brackets and such. Probably just Por15 the brackets to make them easy to keep clean.

                          Engine will hopfully be in the car by next weekend pending the arrival of the needed parts still.







                          For my first engine pull ever ill say pretty happy. Did it 100% alone , Nothing broke, never had to lift the car off the ground, and the AC and PS systems remained unopened.

                          Out with the old, and in with the new....soon.
                          2016 VW GTI (Stock)
                          2016 VW Jetta 1.4T (Stock)
                          1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
                          2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

                          Comment


                          • Re: Kenny's UrS4

                            Here's me looking through all these great motor pics and thinking "hey I have that same impact gun". That one is great for the price, just make sure the batteries don't freeze.
                            Name: Brent
                            His: '04 TDI Golf Mods: None If it's smoken it ain't broken
                            Family: '15 Jetta Sportwagon
                            Fun car: '92 Blue Karmann Crabby Cabby Mods: Coils, front and rear swaybars, LED interior lights and some other old things.

                            Comment


                            • Re: Kenny's UrS4

                              Originally posted by Stonewall View Post
                              Here's me looking through all these great motor pics and thinking "hey I have that same impact gun". That one is great for the price, just make sure the batteries don't freeze.
                              That impact saved me a few times.
                              2016 VW GTI (Stock)
                              2016 VW Jetta 1.4T (Stock)
                              1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
                              2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

                              Comment


                              • Re: Kenny's UrS4



                                Engine is in...we are moving on to getting it running. Need a few more small things.
                                2016 VW GTI (Stock)
                                2016 VW Jetta 1.4T (Stock)
                                1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
                                2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve)

                                Comment

                                Working...
                                X