Project Tial650 S4 complete...

[The_Jerbel]

Re: Project Tial650 S4 complete...

There's not a ton you can do to align the stock S4 bumper. What's wrong with it right now?

[The_Jerbel]

Re: Project Tial650 S4 complete...

I was just woundering if meth is reffering to methyl hydrate?

Yessir.

[R_Ethug]

Re: Project Tial650 S4 complete...

jordan its just jacked on the fender sides.. like 1/2" gap.. i'll F with it

[The_Jerbel]

Re: Project Tial650 S4 complete...

It's like that on pretty much every OEM S4 bumper that's ever been removed.

The side clips are riveted to the fender, which gets pulled out slightly when you pull the bumper off.

I could check and make sure the bumper is seated correctly in the clips, but beyond that there's not much you can do- other than screwing it up into the fender

[R_Ethug]

Re: Project Tial650 S4 complete...

yea i'll play now that i know how it sticks.. the stupid side clips pop out of the fender causing the gap i think.. i lift the bumper and push it back in but the 2 minutes of driving over a bump it falls out again.. i'll just play around.. its the dumbest bumper design ever tho..

[grim420]

Re: Project Tial650 S4 complete...

I don't know if I am going to beable to sleep tonight this is way better than X-mas

[fazda]

Re: Project Tial650 S4 complete...

lol if i know you im sure you have all the tools possible to have a great sleep tonight. lol

[fazda]

Re: Project Tial650 S4 complete...

...

[The_Jerbel]

Re: Project Tial650 S4 complete...

What hiccup?

[R-Audi]

Re: Project Tial650 S4 complete...

You can also adjust how high the bumper sits on the front mounts pretty easily.. that could help get rid of some of the side gap.
(The front mounts have inserts that are threaded and move up and down..)

[fazda]

Re: Project Tial650 S4 complete...

i sent you pm.

[The_Jerbel]

Re: Project Tial650 S4 complete...

You can also adjust how high the bumper sits on the front mounts pretty easily.. that could help get rid of some of the side gap.
(The front mounts have inserts that are threaded and move up and down..)

If the gap was vertical, that would help, but it's usually lateral...

[R_Ethug]

Re: Project Tial650 S4 complete...

thanks mark.. it is vertical.. and i did remove teh bumper shocks as per APRs instructions when installing my intercoolers so that coulda F'd it up.. doh

[dogbreath]

Re: Project Tial650 S4 complete...

Has there been any updates on this car?

[dogbreath]

Re: Project Tial650 S4 complete...

Does anyone know if this car was at the show? I only seen 3 b5s4 was it one of them?