Project b6 a4 has a body

[jta430]

Re: Project b6 a4 has a body

does anyone have any idea how to find out why the head light washer isn't working i know the pump works but it seems like there is a clog in the system...
also is the rs4 steering wheel inter changeable with the a4 one? its blue and worn looks kind of bad

i think any steering wheel after 2005/2006 has dual stage airbags which dont work with the single stage controller in the b6

i put a euro a3 sline wheel in my b6 perfect fit even has the paddles.

[Polishdupa]

Re: Project b6 a4 has a body

Do you have a picture of what it looks like so I have an idea

[jta430]

Re: Project b6 a4 has a body

http://www.ebay.ca/itm/Audi-A3-A4-A6...item335ce5b64c

mine is the same as this but leather not alcantara cant seem to find the leather version on site anymore.

[Polishdupa]

Re: Project b6 a4 has a body

thats nice but I don't need the paddle shifting and I kind of like the steering wheel controls

[jta430]

Re: Project b6 a4 has a body

yeah thats the only m/f wheel for the b6, when i was doin my swap.there is a few people on audiforum.com
running b7 m/f wheels in b6s issue is the airbag, the single stage controller is wired to both stages of the dual stage airbag in the wheel,but nobody knows for sure if the airbag will deploy when needed.
for me it was to much of a risk to take.

[Polishdupa]

Re: Project b6 a4 has a body

Haha I'm sure no one what's to test that out

[Polishdupa]

Re: Project b6 a4 has a body

whats the difference between the base model, the sport model, and the ultra sport models

[jta430]

Re: Project b6 a4 has a body

sport / is just bigger wheels and low profile tires and the sport suspension i think thats it .

the usp is quite a bit different it has more aggresive front and rear bumpers,door blades,all colour matched. air leather steering wheel and shifter.i have seen some with the silk napa leather on the seats not sure if this was an optional extra or not.

depends on the engine as well for the b6 3.0 had a lot more options as standard than the 1.8t s did.

[Polishdupa]

Re: Project b6 a4 has a body

p0030 code... H02S heater control circuit (bank 1 sensor 1). I checked the ohms on the 02 sensor passenger side and got 8.5 ohms(that's when I got confused about what bank 1 means) so i just ended up checking the drivers side and also got 8.5 ohms. vagcom showed that the voltage wasn't changing when running. now I'm at a lost

[sabbySC]

Re: Project b6 a4 has a body

Car looks nice. If I'm not mistaken resistance will change as the sensor experiences different conditions, a static check doesn't show this unless there is an internal short. Bank 1 sensor 1 generally refers to the forward most sensor pre cat, I assume there are two forward sensors in this car so pick one and swap it, if that doesn't work, swap the other one with the sensor you just pulled. Should do the trick, though admittedly I am not experienced with the v6.

[Polishdupa]

Re: Project b6 a4 has a body

wow thats a good idea I'm going to grab a 02 socket and try that plan of attack tomorrow.

[Polishdupa]

Re: Project b6 a4 has a body

haha i should have guessed that

[Shoppingcart111]

Re: Project b6 a4 has a body

Sport and Ultrasport models also have a stress bar tieing the front strut towers together.

[The_Jerbel]

Re: Project b6 a4 has a body

Bank 1 is the passenger side, sensor 1 is the pre-cat sensor.

[Polishdupa]

Re: Project b6 a4 has a body

Thanks again I figured out bank 1 meant the side that cylinder 1 is on
Thanks for clearing that up Jordan