So I picked up a Imola B5 this spring, was a members car a few years back. I was just going to use it as a commuter for work but I couldn't leave it alone. Might not be selling this one soon lolol ![Amazed](https://www.eurodrivers.ca/forums/core/images/smilies/amazed.gif)
When I picked the car up it had roughly 320,000km's, was already a stage 3 with F21's, Jfonze tune, all the supporting mods and in need of a lot of love.
Here she is a few days after I picked it up
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/C5046C7D-DFA3-485F-9649-599774E9AD7E_zps6c79bkkb.jpg)
Driving the car home there was some clunking in the front end, I didn't think anything of it for the first few days as I needed to get around and it was my only option. The noise was starting to get louder so I put the car in the air expecting to find worn sway bushings... Wouldn't that have been nice! I found the upper control arm pinch bolt had been over torqued at some point and cracked the aluminum upright as well as a nice little bend to the stasis coils. Parts were ordered, all new HD control arm kit, cast uprights and H&R ultralow coilovers went in as well as a set of wheels I had found for a decent price.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/B74F8ADC-5D0F-4F90-A1CF-285D172F47CA_zpsptlzmy3a.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/C79B1A42-7A41-4245-AFBA-234186BDDBCA_zpsugqrww4s.jpg)
Next up was the paint, it was cloudy and the interior needed a good detail so Jed @ mobile reflections worked some magic on it with a full detail, interior shampoo, 3 stage polish and hydrophobic coating to seal things in.
The cluster had burn't out pixels and the steering wheel had seen some good use so new cluster was sourced and wheel ordered. I also refreshed the blacked out look on the front of the car with bits and pieces from Rod and found a set of OEM aluminum mirror housings from Australia. The US spec HID's headlights received a murimoto 55w D2S retro kit. Don't mind the lame europlate lol.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/C5E72201-3BA7-4A6E-9F4C-F2E2B13A070B_zps6c1tvese.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/A87DB475-6D2D-4342-B37E-11CC61285CAD_zps3hfpoc23.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/E6884A16-E19F-478A-B0FA-C956564A5043_zpskzmm4adi.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/8F8715B0-CFD4-4658-9406-22615BDE50AA_zpsnwyti3xz.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/3E77642D-ECC7-437C-882B-9ED7226A70EF_zps1ljjrgrm.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/726235C7-2D53-4C3C-97EC-62E33BBB425C_zpsm6k76vti.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/1CE69CBD-208A-49A3-A24B-ED6915F69AF4_zpspinf7pwr.jpg)
Fast forward a bit and I find myself looking for a core engine to rebuild over the next while with thoughts that I'd like to build it to be... quicker lol. Ryan ended up still having his Eurospec 3.0L engine that he was going to use in his monster A6 and a rebuilt transmission with JHM syncros. Dropped the car off at CAW with Colin and Chris to get the transplant.
The engine still had stock valves in it so the heads were pulled and sent out to get incanel exhaust and stainless intake valves put in to accompany the rosten springs and retainers Ryan had in it. Heads also got a light porting.
Parts being used for this madness:
Eurospec 3.0L
Ported 2.8L heads
Supertech Incanal exhaust valves
Supertech stainless intake valves
Rosten Valve Springs
Rosten Titanium retainers
Eurospec crank girdle
RS4 Intake manifold and bi-pipes
Tial XR770 Turbos
SPEC Super-twin Carbon Clutch
JHM Drivetrain Stabilizer
JHM Shifter and linkage
JHM Rebuilt O1E
Raxle Axles
034 Billet Diff Carrier
034 Billet Diff Mount
034 Solid rear sway
034 Subframe reinforcement
034 Fuel rails
Track Density engine and transmission mounts
Fluidampr pulley
ID1000 injectors
034 Fuel rails
Aeromotive 340 series fuel pump
Electric fan Kit
Coolant pump relocation kit
All-road push down style valve covers
R8 Coilpacks
Wilwood 13" BBK
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/8D3C4F52-3434-4726-B27B-32149699E3A5_zpsh2w477f5.jpg)
New turbos ordered, this I debated about for a while but after riding in Shanes avant that had gotten the new Tial xr770 turbos I was sold. After seeing them when they arrived I knew I had made the right choice. The new Xona CHRA's are beautiful to just look at. If I wasn't so excited to put them in the car they could literally sit on my dinner table as a centre piece, er well, if the wife would allow lol. Pairing all that with an RS4 intake manifold and bi-pipes, ID1000 injectors, water/meth injection and some other goodies the car should be fun!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/E13F5977-C86F-4B8C-9BAC-4D0F7B72F607_zpsdnegllzu.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/498A9CD8-F772-4184-B3C1-0FCBC8CDC647_zpsf7ijf43o.jpg)
Seeing as it was already stage 3 I wanted a baseline dyno to see where the car ends up. It did pretty good for Calgary's elevation, making 402whp.
http://vid81.photobucket.com/albums/...psaotwslf5.mp4
http://vid81.photobucket.com/albums/...psxbl1waag.mp4
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/3A6B6943-ECFE-4AFB-AD33-5F1CFBB7AE5B_zpsmv3xsnsc.jpg)
The engine coming out!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/5DF954F6-0AA7-4372-9C80-793159669CFD_zpshaj1n1kn.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/0B1475F1-CAE5-4831-8ABD-5A69C3DA44D3_zpsmr8wc0hf.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/AB580B28-7E46-4BA2-880F-488296A6AABF_zpswdkgodth.jpg)
Fluidampr resting in place, engine timed!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/B049BB02-1CD2-4E51-9F7C-AA7FFEB479A1_zpsjjgibuc1.jpg)
Found a 13" BBK, not as heafty as the Porsche 18z setups out there but I think it'll be a welcome change over from stock and leave me with more wheel options.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/E2E09A5F-B6F5-4886-B76F-05BB1A6AA8B3_zpssizehzmh.jpg)
Picked out a semi-gloss gunmetal for the wheel color. Ordered a few different sets of the bbs buttons and chrome nuts for the center caps since the ones on the wheels are getting powdercoating too. Not sure what combo is going to look the best.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/29E0E1A2-5C98-401F-AEE3-218CEE296EED_zpsnub9ysec.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/B3FCF8A0-86BC-4E4A-86C0-81E727A75C28_zpsa1uykvga.jpg)
RS4 intake manifold looking beastly
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/28B1BDF0-0E2A-4478-9B68-0B8424F8574B_zps92l5jlwn.jpg)
Turbos going on
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/4986EE2C-C3B0-4208-AD43-415099A4757D_zpsmkwqgo9e.jpg)
Pew pew, clutch on and tranny bolted up!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/769C59DD-F7C2-45DF-B683-5FADF8533044_zpsbsq77zoi.jpg)
AN fittings welded onto the rear water manifold, better coolant, oil and waste gate lines made and routed. Engine harness on and modified for the HPX maf, coil conversion ect. Ran into a snag with the size of the rs4 bipipes vs s4, had to install smaller turbosmart recirc valves for clearance since the forge ones were too large. Also ordered the Wagner rs4 smic setup to resolve the other size problem and provide some additional cooling.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/76C58621-7624-479A-82E0-DBB660ECF559_zpskxmh1zjq.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/EF11EC57-537E-4E65-B3A1-EE31914514D8_zpshauaugz8.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/DECAF854-6FCD-4047-86E2-38FD6CE8672F_zpsqtu8xhuy.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/24599DE7-0D62-44CB-B565-C4463600CEDC_zps3hvkza5q.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/583271FD-5786-453E-A320-B0197BDA9C95_zpsfnuaoefc.jpg)
Engine in, waiting for intercoolers and to make a couple fuel lines to finish up the split feed setup!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/1C2E17B1-744D-456A-949B-B9F4826CEB00_zpsvlhu6dxk.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/58C0ECF9-CB0E-4BC7-8FB9-2E2897F90FE4_zpsmjlpwl26.jpg)
Wheels back from powerdercoating, 235/40/18 Conti DW's mounted. Hung one on the rear just to see how it fit, 20mm spacers are too big.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/76B60A0A-B55C-4760-A548-D94DDDB01153_zpssv1tvyhs.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/39CE70D2-D69A-4BA5-BB4B-D9128FC26168_zpscpsciu0w.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/8D627B59-C196-44FA-9993-794A72CCC7CA_zpsq96jh2as.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/479A5FB8-58E4-4264-A0B8-748132D99E9B_zps72k5g61z.jpg)
Booty with 5mm spacers.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/3E0513DA-6E2F-430D-A521-89D22661D8EC_zpsyeudfflx.jpg)
Downpipes fabbed and intercoolers arrived. So close! Chris does some amazing welding.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/9A6FD7DB-BD48-4360-B5B1-FEA56B214A21_zpsahapywpb.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/F23B2B3D-D9CD-4652-AC50-7B5A2DA5DE2E_zps33sgvxco.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/E4438EF4-E8CC-44F2-9062-AD3F6C141D12_zpsfxlhs6zl.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/DFE3004F-3856-42F9-94C2-8D3D268C8621_zpslsarp1ei.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/5B506110-0552-456B-BB0A-C8229662A7C6_zpshm1mpm6d.jpg)
Picked up a set of Evo 6 Recaros and stripped the covers off, sending them to Tim @ velocity upholstery in Vancouver to get remade. Have to figure out what to do with rear bench as I'm not a fan of the B5 old lazyboy looking seats.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/A4664984-39D6-45E9-9BF3-2B93B486BBB4_zpsfotsb2bw.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/6A136D15-436A-4C55-A31C-BE373654414D_zpsnfpr9jcm.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/8EE0DABE-3F36-49F1-8F90-137D51978518_zpsmg1olfcp.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/EFE30F25-E622-49A2-9DAE-F99F8266C559_zpswec8i3p0.jpg)
That's pretty much it for now, it runs and drives, break in period now but she feels like a beast. Hitting about 12-13 psi by 3000 rpm.
I think I'm going to name her Stella.
![Amazed](https://www.eurodrivers.ca/forums/core/images/smilies/amazed.gif)
When I picked the car up it had roughly 320,000km's, was already a stage 3 with F21's, Jfonze tune, all the supporting mods and in need of a lot of love.
Here she is a few days after I picked it up
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/C5046C7D-DFA3-485F-9649-599774E9AD7E_zps6c79bkkb.jpg)
Driving the car home there was some clunking in the front end, I didn't think anything of it for the first few days as I needed to get around and it was my only option. The noise was starting to get louder so I put the car in the air expecting to find worn sway bushings... Wouldn't that have been nice! I found the upper control arm pinch bolt had been over torqued at some point and cracked the aluminum upright as well as a nice little bend to the stasis coils. Parts were ordered, all new HD control arm kit, cast uprights and H&R ultralow coilovers went in as well as a set of wheels I had found for a decent price.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/B74F8ADC-5D0F-4F90-A1CF-285D172F47CA_zpsptlzmy3a.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/C79B1A42-7A41-4245-AFBA-234186BDDBCA_zpsugqrww4s.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/C7D6CB86-88BB-49BC-8E82-978447EA7230_zpsg5kur1yd.jpg)
Next up was the paint, it was cloudy and the interior needed a good detail so Jed @ mobile reflections worked some magic on it with a full detail, interior shampoo, 3 stage polish and hydrophobic coating to seal things in.
The cluster had burn't out pixels and the steering wheel had seen some good use so new cluster was sourced and wheel ordered. I also refreshed the blacked out look on the front of the car with bits and pieces from Rod and found a set of OEM aluminum mirror housings from Australia. The US spec HID's headlights received a murimoto 55w D2S retro kit. Don't mind the lame europlate lol.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/C5E72201-3BA7-4A6E-9F4C-F2E2B13A070B_zps6c1tvese.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/A87DB475-6D2D-4342-B37E-11CC61285CAD_zps3hfpoc23.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/E6884A16-E19F-478A-B0FA-C956564A5043_zpskzmm4adi.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/8F8715B0-CFD4-4658-9406-22615BDE50AA_zpsnwyti3xz.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/3E77642D-ECC7-437C-882B-9ED7226A70EF_zps1ljjrgrm.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/726235C7-2D53-4C3C-97EC-62E33BBB425C_zpsm6k76vti.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/1CE69CBD-208A-49A3-A24B-ED6915F69AF4_zpspinf7pwr.jpg)
Fast forward a bit and I find myself looking for a core engine to rebuild over the next while with thoughts that I'd like to build it to be... quicker lol. Ryan ended up still having his Eurospec 3.0L engine that he was going to use in his monster A6 and a rebuilt transmission with JHM syncros. Dropped the car off at CAW with Colin and Chris to get the transplant.
The engine still had stock valves in it so the heads were pulled and sent out to get incanel exhaust and stainless intake valves put in to accompany the rosten springs and retainers Ryan had in it. Heads also got a light porting.
Parts being used for this madness:
Eurospec 3.0L
Ported 2.8L heads
Supertech Incanal exhaust valves
Supertech stainless intake valves
Rosten Valve Springs
Rosten Titanium retainers
Eurospec crank girdle
RS4 Intake manifold and bi-pipes
Tial XR770 Turbos
SPEC Super-twin Carbon Clutch
JHM Drivetrain Stabilizer
JHM Shifter and linkage
JHM Rebuilt O1E
Raxle Axles
034 Billet Diff Carrier
034 Billet Diff Mount
034 Solid rear sway
034 Subframe reinforcement
034 Fuel rails
Track Density engine and transmission mounts
Fluidampr pulley
ID1000 injectors
034 Fuel rails
Aeromotive 340 series fuel pump
Electric fan Kit
Coolant pump relocation kit
All-road push down style valve covers
R8 Coilpacks
Wilwood 13" BBK
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/8D3C4F52-3434-4726-B27B-32149699E3A5_zpsh2w477f5.jpg)
New turbos ordered, this I debated about for a while but after riding in Shanes avant that had gotten the new Tial xr770 turbos I was sold. After seeing them when they arrived I knew I had made the right choice. The new Xona CHRA's are beautiful to just look at. If I wasn't so excited to put them in the car they could literally sit on my dinner table as a centre piece, er well, if the wife would allow lol. Pairing all that with an RS4 intake manifold and bi-pipes, ID1000 injectors, water/meth injection and some other goodies the car should be fun!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/E13F5977-C86F-4B8C-9BAC-4D0F7B72F607_zpsdnegllzu.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/498A9CD8-F772-4184-B3C1-0FCBC8CDC647_zpsf7ijf43o.jpg)
Seeing as it was already stage 3 I wanted a baseline dyno to see where the car ends up. It did pretty good for Calgary's elevation, making 402whp.
http://vid81.photobucket.com/albums/...psaotwslf5.mp4
http://vid81.photobucket.com/albums/...psxbl1waag.mp4
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/3A6B6943-ECFE-4AFB-AD33-5F1CFBB7AE5B_zpsmv3xsnsc.jpg)
The engine coming out!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/5DF954F6-0AA7-4372-9C80-793159669CFD_zpshaj1n1kn.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/0B1475F1-CAE5-4831-8ABD-5A69C3DA44D3_zpsmr8wc0hf.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/AB580B28-7E46-4BA2-880F-488296A6AABF_zpswdkgodth.jpg)
Fluidampr resting in place, engine timed!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/B049BB02-1CD2-4E51-9F7C-AA7FFEB479A1_zpsjjgibuc1.jpg)
Found a 13" BBK, not as heafty as the Porsche 18z setups out there but I think it'll be a welcome change over from stock and leave me with more wheel options.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/E2E09A5F-B6F5-4886-B76F-05BB1A6AA8B3_zpssizehzmh.jpg)
Picked out a semi-gloss gunmetal for the wheel color. Ordered a few different sets of the bbs buttons and chrome nuts for the center caps since the ones on the wheels are getting powdercoating too. Not sure what combo is going to look the best.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/29E0E1A2-5C98-401F-AEE3-218CEE296EED_zpsnub9ysec.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/B3FCF8A0-86BC-4E4A-86C0-81E727A75C28_zpsa1uykvga.jpg)
RS4 intake manifold looking beastly
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/28B1BDF0-0E2A-4478-9B68-0B8424F8574B_zps92l5jlwn.jpg)
Turbos going on
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/4986EE2C-C3B0-4208-AD43-415099A4757D_zpsmkwqgo9e.jpg)
Pew pew, clutch on and tranny bolted up!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/769C59DD-F7C2-45DF-B683-5FADF8533044_zpsbsq77zoi.jpg)
AN fittings welded onto the rear water manifold, better coolant, oil and waste gate lines made and routed. Engine harness on and modified for the HPX maf, coil conversion ect. Ran into a snag with the size of the rs4 bipipes vs s4, had to install smaller turbosmart recirc valves for clearance since the forge ones were too large. Also ordered the Wagner rs4 smic setup to resolve the other size problem and provide some additional cooling.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/76C58621-7624-479A-82E0-DBB660ECF559_zpskxmh1zjq.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/EF11EC57-537E-4E65-B3A1-EE31914514D8_zpshauaugz8.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/DECAF854-6FCD-4047-86E2-38FD6CE8672F_zpsqtu8xhuy.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/24599DE7-0D62-44CB-B565-C4463600CEDC_zps3hvkza5q.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/583271FD-5786-453E-A320-B0197BDA9C95_zpsfnuaoefc.jpg)
Engine in, waiting for intercoolers and to make a couple fuel lines to finish up the split feed setup!
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/1C2E17B1-744D-456A-949B-B9F4826CEB00_zpsvlhu6dxk.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/58C0ECF9-CB0E-4BC7-8FB9-2E2897F90FE4_zpsmjlpwl26.jpg)
Wheels back from powerdercoating, 235/40/18 Conti DW's mounted. Hung one on the rear just to see how it fit, 20mm spacers are too big.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/76B60A0A-B55C-4760-A548-D94DDDB01153_zpssv1tvyhs.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/39CE70D2-D69A-4BA5-BB4B-D9128FC26168_zpscpsciu0w.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/8D627B59-C196-44FA-9993-794A72CCC7CA_zpsq96jh2as.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/479A5FB8-58E4-4264-A0B8-748132D99E9B_zps72k5g61z.jpg)
Booty with 5mm spacers.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/3E0513DA-6E2F-430D-A521-89D22661D8EC_zpsyeudfflx.jpg)
Downpipes fabbed and intercoolers arrived. So close! Chris does some amazing welding.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/9A6FD7DB-BD48-4360-B5B1-FEA56B214A21_zpsahapywpb.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/F23B2B3D-D9CD-4652-AC50-7B5A2DA5DE2E_zps33sgvxco.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/E4438EF4-E8CC-44F2-9062-AD3F6C141D12_zpsfxlhs6zl.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/DFE3004F-3856-42F9-94C2-8D3D268C8621_zpslsarp1ei.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/5B506110-0552-456B-BB0A-C8229662A7C6_zpshm1mpm6d.jpg)
Picked up a set of Evo 6 Recaros and stripped the covers off, sending them to Tim @ velocity upholstery in Vancouver to get remade. Have to figure out what to do with rear bench as I'm not a fan of the B5 old lazyboy looking seats.
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/A4664984-39D6-45E9-9BF3-2B93B486BBB4_zpsfotsb2bw.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/6A136D15-436A-4C55-A31C-BE373654414D_zpsnfpr9jcm.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/8EE0DABE-3F36-49F1-8F90-137D51978518_zpsmg1olfcp.jpg)
![](http://i81.photobucket.com/albums/j240/ledzepp39/Mobile%20Uploads/EFE30F25-E622-49A2-9DAE-F99F8266C559_zpswec8i3p0.jpg)
That's pretty much it for now, it runs and drives, break in period now but she feels like a beast. Hitting about 12-13 psi by 3000 rpm.
![Bigsmile](https://www.eurodrivers.ca/forums/core/images/smilies/bigsmile.gif)
Comment