Oil Pressure Gauge

[RONDAL]

Re: Oil Pressure Gauge

then do what i listed and you're set.

[Tuna]

Re: Oil Pressure Gauge

Doesn't need to be, was just using it as a reference.

[RONDAL]

Re: Oil Pressure Gauge

wtf do you need a 42DD one for? pop off the sensor, take it to any decent auto parts store and ask for a brass T the will screw into that hole and take the sensor. It will cost you less than $3.

If mine was still off my car I would find out the size for you but the front end is back on.

Look at my build thread at the pics of how I did my oil feed line off the filter. You just need one of those.

[Tuna]

Re: Oil Pressure Gauge

its either the blue or black sensor on top of the oil filter housing. Otherwise you could simply T off one of those and install a pressure sensor.

I will do some digging and see if I can find out for you.

Yea I think 42dd makes a Tee off for it, but wasn't sure if that was where you're supposed to work from. I'll read a little more tonight.

[RONDAL]

Re: Oil Pressure Gauge

its either the blue or black sensor on top of the oil filter housing. Otherwise you could simply T off one of those and install a pressure sensor.

I will do some digging and see if I can find out for you.

[Tuna]

Anyone have any experience installing one? I want to put one on the VR6 and it LOOKS as though you may be able to use one of the sensor locations on top of the oil filter housing. I looked on Vortex but the only info there seems to be for Corrado's which already have a stock gauge.

Any info appreciated. The best info so far has been the 42DD site which is pretty confusing.