If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Looks to me like the previous owner was a Fatty! LOL.
PS. Time for some new seats bro!
i will not spend my stampede bonus on these seats, i will not spend my stampede bonus on these seats, i will not spend my stampede bonus on these seats, i will not spend my stampede bonus on these seats
I'd say if you have the time go to a fabrication shop in Kelowna and get it welded. If you are in a rush and need to get home, than just strap that bastard together and drive home.
I would say go to the dealership and say wtf? but in all honesty they are probably going to tell you to pound sand. Find somewhere that will weld it for you and be done.
hey guys, so im out in the okanagan right now and went to go for a drive a few days back and leaned into the seat as I was driving and then all of a sudden got thrown way back like a rocking chair. I pulled over and looked at the seat and saw the metal bracket which holds the bottom rail to the seat at the front had sheared right off. I cant believe of all things that this would fail. Needless to say, what do I do now? I have taken some pics of the bracket and today got a very strong wire to hold the seat down for the drive back to Calgary next week but I am not too impressed with this bracket failing. Im not a big guy either, only about 180 lbs and 5'11'' give or take. Any one know what to do or have seen this happen?
Leave a comment: