Announcement

Collapse
No announcement yet.

Door Adjustments

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MrAvantit
    replied
    Re: Door Adjustments

    Originally posted by Yasek View Post
    on the inside of the door there should be a torx screw (look at pic for reference), im assuming its simmalar on the MB
    http://farm3.static.flickr.com/2631/...ded37f27_o.jpg

    Loosen those screws just enough to be able to have movement in the locking mechanism. (don't remove screws), and then shift the locking mechanism closer to the inside of the door.

    you can to that by loosening the screw, then while the bit is still in the screw, slide with the mechanism.

    If that does not cure it try moving the whole set up the other direction. How are the doors opening at the moment besides the tough closing?

    Bah, only have one screw there above the latch........

    Leave a comment:


  • MrAvantit
    replied
    Re: Door Adjustments

    Sweet!

    Thanks a lot Yasek! I will give this a try this weekend when i get back from Calgary.

    The doors seem to close fine if i apply more pressure, they do not hang lower and the trim aligns well. They closed great before going to the body shop.......

    I'll update the thread this weekend and let you know how i made out.

    Leave a comment:


  • Yasek
    replied
    Re: Door Adjustments

    on the inside of the door there should be a torx screw (look at pic for reference), im assuming its simmalar on the MB
    http://farm3.static.flickr.com/2631/...ded37f27_o.jpg

    Loosen those screws just enough to be able to have movement in the locking mechanism. (don't remove screws), and then shift the locking mechanism closer to the inside of the door.

    you can to that by loosening the screw, then while the bit is still in the screw, slide with the mechanism.

    If that does not cure it try moving the whole set up the other direction. How are the doors opening at the moment besides the tough closing?

    Leave a comment:


  • MrAvantit
    started a topic Door Adjustments

    Door Adjustments

    Hello,

    I got my car repainted last year at a shop and the doors are having some issues closing. Fortunately for me, the shop moved or went out of business and i cannot track them down.

    Can you guys help? The doors seem aligned but have to slam them really hard to get them to close.

    BTW , the car is a 1994 MB C-class
Working...
X