From China with Love

[Ur0Drivr]

Re: From China with Love

Thanks for the great update Jerry!!

[Danaldson]

Re: From China with Love

looking good jerry. busy end of summer!

[kujiwara]

End of Summer

As summer came to an end, I finally had the chance to test out how the car would do in a relatively high speed autocross course. The course is located at Fort Mcleod Airport, been there sometimes, but never in this car. Was quite nervous, but the results turned out to be very satisfying, the car goes exactly where I want it to, with the help of Bilstein PSS9, 28mm RSB, multiple chassis braces and Wilwood brakes, the car is precise and accurate, with ZERO understeer, and I can rotate it however i want with whatever driving technique, Wavetrac works great at low speed corners, and the camber plate held up great. RE11s were great too but seems like every single other car had RE71Rs, so Ill be getting a set of those for dedicated events(thinking about putting them on my white sparcos).

Went to the town early in the morning and took some photos on the quiet streets.







Autocross



















Runs were continuous within the same class so we had to change tire pressure constantly



An interesting find is that I mounted my go pro on my jetta and my buddy's 03 gli, and we were able to see the gap between the front and rear doors by the b pillar constantly change. However, my car with much stiffer suspension setup (which should transfer more stress to the unibody meaning more flex) was deforming much less(less than 1mm) than the 03 with Solowerks which were much softer(doors were pushing out by millimeters). We drive very similarly and I don't believe a subframe brace and a C-pillar brace will make that big of a difference. Maybe the freshly welded rear end which my bodyshop friend guaranteed me to be stronger than stock is actually true if thats even possible.

And we took some much needed roller shots on the way back











After that I left the Jetta in Calgary planning to drive the mercedes around in Vancouver for school so if anything were to get hit again it would not be the jetta.

However, plans changed, my aunt needed a larger car in Vancouver so I gave her the merc, and she gave me her Eos, but since the jetta is just taking up garage space in Calgary and I'm in Vancouver 11 out of 12 months, I decided to bring the car over, during Thanksgiving break, so I could work on it during my spare times.

By then it was already mandatory to have snow tires to travel on the highway, and my old winters were left in Vancouver( they're bald anyways). So I borrowed a set of 15mm wheel adapters from my friend in Van, bought a set of 5x112 18x8.5 Volk Racing G25 Flow Formed wheels with some Russian snow tires to get my car to Vancouver. I planned to sell these in Vancouver where everything seems to worth more, since I don't plan on driving it in winter anyways, so hit me up if you like them!

Well, the trip REALLY happened because I needed to bring the mercs winters over so I could drive that back to Calgary for winter break.








So here you see four 20x11 OZ racing wheels and 275/50 tires, and four 19x8.5 BBS wheels with 235/35 tires all stuffed into on tiny Jetta.
One large and two small in trunk, three large and one small in rear seat, and the last one on the passenger seat.






Also took a shot with mom's nurburgring weapon.




And it just happened that on the day I was leaving my buddy who works at HPA was also heading back from Calgary to Van in his 600hp R32 with summers, so that was quite a drive.





As the school year just began I still had a little time to explore around so I took the Jetta to every single mountain around Vancouver, and it held up great.









ANNNNNNDDDDDD things went downhill not long after, rain season hit hard and the newly welded on rear end became a fish tank, that is currently being warrantied, but i totally would put a few nemos in there for car shows, and car got HIT again in two spots, driver side quarter panel and passenger side fender, so that's also being fixed at the same time.








Car will be put in storage in White Rock after it's repaired and back on the road in March. While it's parked I got some R32 spindles and control arms I'm debating to put in or not(already have 8 degrees of caster and -2 camber), a custom set of Morimoto projectors and HIDs being made so I could replace those tiny 1.75inch oem projectors, and a few other things in the back of my head I want to do.



As of end of 2016 specs are:
3.2 vr6 audi bhe, 40000km since rebuilt, 264/260 cammed, ARP bolts, UM custom tune, intake.
Full 3 inch with cat delete.
280hp 6700rpm, 250lbft 3000-5000rpm.

1395kg 61.4% weight in front.
14.08 at 104mph (Will break 13s for sure when I learn how to launch properly, not installing supercharger until I accomplish that because this trap speed is for cars that can run low 13s according to the internet)

Wavetrac, 02M, solid shifter bushes everywhere.
R32 flywheel, clutch

BFI stage 2 all around
Oem 1.8t axles
Solid rubber suspension bushes

Silver project camber plates
Bilstein pss9
Autotech RSB 28mm
23mm GLI FSB
Eurosport subframe brace, C pillar brace

Wilwood 4 piston forge aluminum caliper
2 piece rotors with aluminum hat 312x25
Hawk HPS pads
Motul 600 BF

R32 seats, pedals
MK5 GLI wheel
Skoda Octavia RS shifter, repainted
P3 gauge
Kujiline cluster
Chrome switches everywhere
Euro stereo with bluetooth audio
Leather door cars


Needs work:

Classic PSS9 being "too low" noise, gonna use solidworks and cnc machine to fix that
Headlight needs to be better
New summer tires, anyone went from Re11 to Michelin PSS?
Do I need R32 spindles and arms
Rain visors?
Badges?
Custom roof?
Supercharger?
Liberty Walk?

[kujiwara]

Re: From China with Love

It's the only meet I could probably make it to in Calgary this year, but came across many OG eurodrivers and met some awesome new people at menace rides, first jdm meet I've went to but managed to steal some of the vapers' attention. Ft Jay's car classy as usual and Dean's golf with some fenders that I can't see.





And here is the OG Asian MK4 crew, the two helped me massively during engine swap, Chris and his platinum grey 24v gli with my old exhaust and Ken in his reflex silver 24v gli in my old wheels.

[All_Euro]

Re: From China with Love

Awesome news on the charger! Gold foil is a negative but I could see the same colour as your valve cover.

[Geobmx4life]

Re: From China with Love

Gold is too much....I think it would be a waste, at least if you polish it....it has your touch!

[kujiwara]

Re: From China with Love

Oh fuq I thought I uploaded the one without the nips, but I guess whatever float you guys' boats haha

I want to make the charger "pop" in the bay, thinking about that good old fashioned Chinese gold plate, or a kujiwara Polish thing that I haven't done in a while, what do you guys think? I'm actually torn between being me or Chinese

[flipstah]

Re: From China with Love

To the supercharger or Jerry's nipples?

Whichever hits the screen first.

[MechEngg]

Re: From China with Love

Fapfapfap

To the supercharger or Jerry's nipples?

[flipstah]

Re: From China with Love

Fapfapfap

[funkin]

Re: From China with Love

^ lol

Nice Jerry! I was wonder how long until you'd go FI with it. Jetta is going to be a torque monster.

[GingerBeef]

Re: From China with Love

Your nipples are gross Jerry. Nice charger though...

[kujiwara]

Re: From China with Love

Got my hands on a nearly complete 20000mile HPA typhoon iXH preproduction kit, excluding ecu and manifold, I don't need them at all anyways so this kit is pretty perfect for me. Didn't really need it at all but the price was too good to pass.
This kit includes a HPA exclusive Vortech V9 H trim preproduction supercharger, featuring oversized inlet compared to the v9f and v9g vortech sells, 850cfm and gonna run at 10psi. With all the current setup plus supercharger, I think 420HP and 320lbft should not be difficult. Everything looks and feels solid, gonna take the kit to HPA to see if it needs anything in september.
Also found a great restaurant.





I'm planning to run a custom water to air intercooler rated for at least 500hp, either custom HPA or UM tune, and some gold.

[BaggedGLI]

Re: From China with Love

10psi no worries.

[kujiwara]

Re: From China with Love

Got a question for boosted R32 guys, can the stock manifold take 10psi of boost from an 850cfm supercharger? Also do you guys run any extra engine cooling systems?

this kit I bought doesn't include the liquid cooled alloy intake manifold not tune from hpa, I don't want one either since it's a lot of mass on the top of the car and deletes the variable intake thing, I'll run air to air intercooler to take care of the cooling. But can the stock manifold hold 10psi of boost from a vortech v9h supercharger? Most of the boosted vr6 I see here have some sort of aftermarket manifold, but in Europe I see a lot of people running superchargers and turbos on stock plastic manifolds. Do any of r32/24v guys here run similar boost with stock manifolds?